Minerallac | Electrical Construction Hardware Manufacturer & Supplier. Cully

Adhesion Strength

20 oz/in

20 oz/in to Steel

21-23 oz/in

55

70

95 oz/in to Steel and 42 oz/in to Backing

Allowable Load Capacities (2000 PSI Concrete)

1,165 lbs Tension, 3,095 lbs Shear

2,145 lbs Tension, 3,920 lbs Shear

Anchor Size

Application

Threaded fastening system for suspending steel threaded rod horizontally in steel fixtures

Immediately identifies the type of utility line buried below, both by permanently printed legend and an APWA designated utility color.

#10-#12 Spanner Fasteners

#2 Phillips Fasteners

#6-#8 Spanner Fasteners

1/4" Bits

1/4" Hex Driver Bit

18-8 Stainless steel screws are used in applications which require general atmospheric corrosion resistance.

3 Strand Poly Rope is a strong lightweight rope making it a very economical and versatile option for many applications. This rope has a good strength and moderate stretch with a medium laid for balanced construction. It is resistant to rot, mildew, & petroleum products and can be stored wet without fiber damage. UV stabilized fibers that even float in water.

3/8" Hex Driver Bit

410 stainless steel anchor designed for lgiht to medium duty applications in concrete and masonry block base materials. This anchor features an enhanced corrsion resistant coating over typical carbon steel fasteners.

410 stainless steel anchor designed for light to medium duty applications in concrete and masonry block base materials. Fast and easy installation provides a neat and finished apperance. This anchor features an enhanced corrision resistant coating over tpyical carbon steel fasteners.

410 stainless steel anchor designed for light to medium duty applications in concrete and masonry block base materials. Fast and easy installation provides a neat and finished apperance. This anchor features an enhanced corrison resistant coating over typical carbon steel fasteners.

410 stainless steel anchor designed for light to medium duty applications in concrete and masonry block base materials. Fast and easy installation provides a neat and finished apperance. This anchor features an enhanced corrsion resistant coating over typical carbon steel fasteners.

410 stainless steel anchor designed for light to medium duty applications in concrete or masonry block vase materials. Fast and easy installation provides a neat and finished apperance. This anchor features an enhanced corrsion resistant coating over typical carbon steel fasteners.

5/16" Hex Driver Bit

6 Carbon Plug Taps: 4-40, 6-32, 8-32, 10-24, 10-32 & 1/4"-20

A carbon steel machine bolt anchor designed for use in shallow embedment applications.

A convenient part that may be used as a temporary fastening in overhead applications for suspending light weights for a short period of time.

A fav among trades professionals, this Screwdriver features a quick-change coupler that accepts all ¼” hex-shank groove accessories. A great fit for those who work with sockets, nuts, and recessed fasteners. This driver works with a wide selection of extensions and adapters so you have all the functions you need in one handy tool. The S2 steel bits stored in the Original Retractable Bit Cartridge lock-in and are ANSI compatible

A straw dispensed foam that expands, bonds and seals to stop the passage of air, gases, water, dust, fibers, sound, rodents, pests, radon, and orders. Bonds to most materials making it a very versatile solution.

Acoustic tile, brick, cast iron, cement board, ceramics, cinderblock, composites, computer flooring, fiberglass, hardened steel, particleboard, asbestos board, and Formica.

Adheres to the inside back wall of an electrical box.

All purpose weatherproof first aid kit that contains 72 essential first aid supplies for treating minor wounds and injuries. Ideal for home, travel, and on the go use. Designed in a durable case to ensure contents are protected from day to day exposure and damage

All Purpose, Automotive, Camping, Construction & Hardware, Delivery, Farm & Ranch, and Gardening & Landscaping

All Purpose, Automotive, Camping, Construction & Hardware, Delivery, Farm & Ranch, Gardening & Landscaping

All purpose, automotive, camping, construction & hardware, delivery, farm & ranch, gardening & landscaping, and recreation.

All Purpose, Automotive, Camping, Construction & Hardware, Delivery, Farm & Ranch, Gardening & Landscaping, and Recreation.

All Purpose, Camping, Cold Weather, Construction & Hardware, Delivery, Farm & Ranch, and Gardening & Landscaping.

All purpose, camping, construction and hardware, delivery, farm and ranch, and gardening and landscaping.

All Purpose, Farm & Ranch, Gardening & Landscaping

An all-steel pre-assembled single unit sleeve anchor designed for us in concrete or masonry base materials. The anchors are available in multiple head styles for mulitple applications and a finished apperance.

An all-steel pre-assembled single unit sleeve anchor designed for use in concrete or masonry base materials. The anchors are available in multiple head styles for multiple applications and a finished apperance.

Applied by hand

Attaches drop ceiling tie wires to steel

Attaches through gypsum and wood; also works in double drywall applications. Not for use with overhead applications.

Base for 1/2, 3/4, and 1" Vent Pipe

Base for 3" Vent Pipe

Base for 4" Vent Pipe

Butt or Branch Splice, Direct Burial, Water Tight

Cable Clamps are an effective and durable fixed diameter wire management mounting product for routing and securing wires and cables in place. Cable Clamp are easy to install with a screw or rivet.

Cable Management

Camping, cold weather, construction & hardware, farm & ranch, gardening & landscape, Recreation, and Snowmobiling

Camping, Cold Weather, Farm & Ranch, and Gardening & Landscaping

Camping, Delivery, Farm & Ranch, Gardening & Landscaping

Can be easily blown through innerduct to provide smooth, safe pulls.

Can be used as a permanent fastening in side-to-side applications with hooks. May be used in overhead applications to suspend light weights temporary.

Can be used in solid or hollow base materials, and is more resistant to temperature fluctuations and rust than other light-duty anchors.

Can be used to support pipework and pipes, which fluids and gasses pass through.

Can be used with all KENA-LINE™ and TOUGHLINE™ pull lines. Can be used with most other lines on the market today.

Cap nuts serve two main purposes: (1) as decorative pieces, and (2) as covers for projecting threads.

Carriage bolts are designed to keep the bolt from turning when a nut is being tightened.

Cinderblock & Brick

Cleans and Lubricates on the following: Switches, relays, timers, signals, transmitters, condensers, transistors, microphones, panel Boards, circuit Breakers, contacts, meters, receivers, speakers, coils

Cleans and Penetrates on the following: Electric motors, generators, air tools, brakes, clutches, chains, sprockets, wire rope, dies, molds, relays, radar equipment, material handling equipment, air conditioners

Color coding for phase identification, job identification and safety; Insulating electrical wiring; Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather.

Commonly used for overwrapping low voltage splices, harnessing, and cover taping for many mechanical applications. Provides moisture-tight electrical and mechanical protection.

Concrete

Concrete, Brick

Construction sites, Parking and Warehouse applications, or Sidewalk Maintenance.

Converts a 1/4" Hex drive into 1/4" Square Drive.

Cutting

Cutting Drywall/PVC/Wood/Cement Backing Board

Designed by professionals for professionals, the ultimate tool pouch is the perfect pouch for any electrician. It is a durable lightweight pouch that easily attaches to most tool belts

Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.

Designed for anchoring in hollow base materials such as hollow concrete block and precast hollow core plank. Can also be used in solid base materials.

Designed for light duty fastening applications in concrete, block, brick or stone. The body of the Fluted Plastic anchor is injection molded from a ductile plastic and is designed to be used with sheet metal or wood screws. These fasteners are not recommended for use overhead or applications where holding values are critical.

Designed for use indoors or outdoors with rigid conduit and IMC.

Designed to be used in conjunction with other components to temporarily lift and/or suspend light weights.

Designed to be used in sheetrock, plaster, brickwork, concrete, or tile. The shape of the collar allows plastic anchors to also be used in hollow materials.

Designed to be used specifically with machine screws.

Designed to be used with like-material machine screws and bolts.

Designed to fit all common sizes of copper or aluminum.

Designed to keep your hands warm and dry without sacrificing dexterity

Designed to protect and identify above-ground hazardous areas. Can also be used as a long-lasting marking solution for off-limit areas or crowd control.

Designed with the most popular of bits and the Megapro technology we have all come to love, this screwdriver is the multi-purpose screwdriver for any tool box.

Designed with the professional in mind, the 7-pocket tool belt attachment is a great addition to any tool belt to increase comfort and efficiency

Designed with the professional in mind, the tape clip attachment made of durable nylon and a steel clip make a great addition to any tool belt for quick and easy access of tape clip

Dissolves dirt, paint, grease, and grime.

Do you live in wet or harsh enviroment climate? Well this 15 in 1 Screwdriver is designed with the wettest and harshest enviroment in mind so your screwdriver with not rust

Drive in anchor

Driving Steel Rod Hangers

Driving Wood Rod Hangers

Drywall jab saw designed with double sided tooth blade to effectively and efficiently cut through dry

Drywall, Holllow Wall, Concrete, Wood, Brick

Drywall, Horizontal

Drywall,Vertical

Drywall. Horizontal

Duct Sealing - heating, air conditioning, ventilating and refrigeration applications, sealing of seams and joints on metal air handling systems; Bonding, protecting, holding, repairing, and patching; Asbestos removal and polyethylene hanging.

Durable Lightweight comfort belt designed for the working professional.

Durable Nylon Hammer Holder that attaches to must commonly used belts to allow quick and easy access to your hammer.

E-6000 is an industrial grade adhesive that forms a strong bond to most matierals and will remain flexable once cooled make it a great choice for alot of different adhesive needs

E-6800 is a UV grade industrial adhesive that forms a strong bond to most matierals and will remain flexable once cooled make it a great choice for alot of different adhesive needs. It is UV resistant making it more suitable for outdoor applications

Easy to install by hand, use guard boxes on the inside back panel of metallic electrical boxes to maintain the integrity of fire rated wall assemblies restricting the passgae of flames and limiting the temperature rise on the unexposed surfaces. When used as directed, the horizontal separtion between outlet boxes on opposite sides of the wall may be less than 24 inches

Electrical and Electronics Degreasers

Electrical, Commercial Construction, Residential Construction, Utility, Installation, MRO Maintenance & repair operations, Automotive

Electrician's Tool pouch was designed with the professional electrician in mind. It is durable and lightweight and a great additional to any tool belt to add comfort and efficiency.

Excellent choice for bundling lumber and pipes.

Eye Protection

Fast, clean holes with reduced “break out" for through-hole drilling or countersinking.

Fastening Tool

Firestop gaskets are used when electrical boxes are installed in rated walls facing opposite directions and horizontally separated by less then 24". UL tested and can used with both metal and plastica cover plates.

Fits Horizontal Mounts SAMMYS 1/4" & 3/8" Rod

Fits Vertical Mounts SAMMYS 1/4" & 3/8" Rod

Flange provides a more uniform bearing-stress to clamp-force ratio than other low carbon lock nuts.

Flashing for 2" pipe

For any application where drilling behind a wall of other hard to reach locations.

For attaching drywall to metal studs from 25 gage through 20 gage thick. Longer sizes are ideal for multiple layers or insulation.

For attaching drywall to wood studs or to 25 gage metal studs.

For Flex, AC And MC Cables

For installing 1/4" Tapcon fasteners.

For installing 3/16" Tapcon fasteners.

For installing residential wallplates.

For Mounting Cable Ties

For removing phillips, slotted, star, and square screws.

For support of light fixtures and signs

For Tamper Resistant Torx® Screws

For use in all types of conduit (IMC, EMT, PVC, rigid, etc.)

For use in bundling, supporting, and hanging.

For use in concrete, block, brick or stone

For use in concrete, brick, stone or grout-filled block.

For use in fire-rated gypsum wallboard partitions, concrete walls or floors, wood floors and concrete or corrugated steel deck floor/ceiling assemblies.

For use in sharpening auger bits.

For use in situations where traditional saws can't fit.

For use in wallboard.

For use in wood in non-corrosive environments.

For use on doors, windows, crown molding, trim, siding, as well as kitchen & bath applications.

For use on interior and exterior projects.

For use on: Road construction, concrete, asphalt, pavement, gravel, excavation, ground marking, surveying, construction marking, soil, grass, brick, utilities marking, communication lines, electrical installations, and athletic fields.

For use where the need to keep water from seeping into the fastner or fastener hole.

For use with 1/4" hex shank drivers.

For use with a pre-tapped hole or with a nut.

For use with bolts with a minimum tensile strength equal to or less than 120,000 PSI

For use with bolts with a minimum tensile strength equal to or less than 150,000 PSI

For use with bolts with a minimum tensile strength of 120,000 psi

For use with drywall, wood, and ceiling tile.

For use with electrical cables, conduit, and metal pipes.

For use with fluorescent lighting fixtures holding 2, 3, or 4 bulbs.

For use with Lumber Crayons.

For use with matching toggle bolt as a light-duty achors for hollow block or gypsum wallboard.

For use with materials such as: gypsum board, drywall with a steel stud, concrete block, tile over drywall, etc.

For use with metal, drywall, wood, and ceiling tile.

For use with most standard size fasteners.

For use with Rigid, IMC, or EMT Conduit.

For use with sheet metal.

For Wire and Cable Harnessing; Primary electrical insulation for all wire and cable splices up to 600 volts and 105°C (221°F). Excellent abrasion resistance for high voltage cable splices and termination (forms a protective jacket). Provides moisture-tight electrical and mechanical protection.

General Purpose

General purpose anchoring in normal weight concrete, Concrete Masonry, Brick Masonry, and Stone

General Purpose; can be used for joining and splicing wires and cables for electrical insulation. Effective for use in industrial applications for permanent bundling or wrapping where conformability and aging resistance are critical. Provides moisture-tight electrical and mechanical protection. Resists acids, alkalies, abrasion, moisture, corrosion, and varying weather conditions.

General-Purpose

General-purpose fire-rated sealant and smoke seal for construction joints and through-penetrations on both horizontal and vertical surfaces.

Great for heavy-duty permanent installations.

Great for light-duty applications, the screw eye is made with steel for strength and is designed to attach cables or rope to surfaces.

Great for metal-to-metal application in steel and

Great for metal-to-metal application in steel and aluminum up to 12 guage.

Great for overhead applications

Great for overhead applications.

Great for sharpening Knives, shovels, garden tools and axes.

Grounding, Metal Box

Heavy Duty Cable Ties, these cable ties have a tension strength of 120 lbs, making them a great solution for reliabile heavy duty applications.

Heavy Duty hollow wall anchor designed for easy install in base materials such as plaster, wallboard, concrete block, plywood and hollow tile

Household cleaning

Ideal for a wide range of applications where total hand protection is required.

Ideal for any number of rugged applications.

Ideal for attaching base board or trim through one or two layers of drywall to 12 - 20 gauge metal studs.

Ideal for hanging signs, lighting fixtures and novelties such as flower pots, children's toys and other general utility applications.

Ideal for heavy duty cable and wire bundling applications

Ideal for light- to heavy-duty painting projects, both indoors & outdoors

Ideal for light- to heavy-duty painting projects, both indoors and outdoors.

Ideal for light-to-moderate industrial and construction applications.

Ideal for light-to-moderate industrial and construction applications.,

Ideal for very cold environments. Attaches securly to most popular hard hats.

Ideal for: general cleaning, paint spills & cleanup, staining & varnishing , polishing & dusting.

Ideal solution for small, light duty cable and wire bundling applications.

Ideally suited for valves, elbows, and fittings for application in both indoor manufacturing environments and outdoor jobsites. Provides outstanding protection against sunlight, weather, acids, alkalies, saltwater, aging, and corrosive salts and fumes. Minimum Application Temperature 40°F

Ideally suited for valves, elbows, and fittings for application in both indoor manufacturing environments and outdoor jobsites. Provides outstanding protection against sunlight, weather, acids, alkalies, saltwater, aging, and corrosive salts and fumes. Thick backing provides good abrasion resistance and electrical insulation.

Ideally suited for valves, elbows, and fittings, both in plants and outdoors. Provides outstanding protection against sunlight, weather, acids, alkalies, saltwater, aging, and corrosive salts and fumes.

Identifies the type of utility line buried below, both by printed legend and an APWA designated utility color. Used in utility construction, turn and irrigation, CATV, pipeline and mechanical contractors. Tape is buried 4" to 6" below the surface. When digging begins, the tape is dug up first to signal type of line buried below. Tape prevents damage to the line and/or persons digging.

Identifies the type of utility line buried, below, both by printed legend and an APWA designated utility color

Indoors or Outdoors. Use to reduce the size of the knockout in a steel outlet box or other metal enclosure.

Installation of Wood and Concrete Sammys Threaded Rod Anchors.

Installation Tool for installing Rod Hangers in Concrete

Installs eye lag bolts and eye teks.

Installs horizontally into the side of concrete structures for hanging threaded rod.

Installs horizontally into the side of steel structures for hanging threaded rod.

Installs horizontally into the side of wood structures for hanging threaded rod.

Installs vertically and swivels up to 89° in steel structure for hanging threaded rod.

Installs vertically into the bottom of concrete structures for hanging threaded rod.

Installs vertically into the bottom of steel structures for hanging threaded rod.

Installs Vertically into the Bottom of Steel Structures for Hanging Threaded Rod.

Installs vertically into the bottom of wood structures for hanging threaded rod.

Installs Vertically into the Bottom of Wood Structures for Hanging Threaded Rod.

Installs vertically or horizontally into concrete structures for hanging threaded rod.

Instantly removes, dissolves, and rinses away foreign contaminants from sensitive equipment and precision instruments. Spray in well-ventilated areas at room temperature. Shake well before using.

Insulates electrical connections up to 600V; Seals out moisture from low-voltage connections; Insulates service drops and lighting connections; Provides moisture-tight electrical and mechanical protection

Intended for flush mounted, medium to heavy-duty applications in solid materials such as stone and concrete. It can be used in, but are not limited to, overhead assemblies such as duct work and pipe hangers because the internal plug holds its position.

Is a unique 2-component urethane aerosol foam. Special packaging and a rigid dispensing tube make for it easy to use and mess free. The foam starts curing immediately and is fully expanded in 3-5 minutes with excellent adhesion assuring it stays in place. It does not shrink or harden with age and not effected by water.

Lath, plaster, ceiling tile

Leak repair selant that stops leaks instantly on wet or dry surfaces

Light-weight duty anchors to be with a pre-drilled hole in drywall, sheetrock, plaster, or paneling.

Machinable metal, wood, nail-embedded wood, composites, rubber, plastic, plaster, and other common building materials.

Machine screws form a fastening superior in strength to spaced thread screws.

Machine screws form a fastening that is superior in strength to spaced thread screws. For use with a pre-tapped hole or with a nut.

Made from EPDM compound, these rubber taro straps are desgined for long-lasting performance. They work well for outdoor use with expectional properties related to UV, ozone and weather resistance, chemical resistance, and water and heat tolerance.

Maintenace and General Repair; General Purpose Abatement and Contractor Applications; Bundling, Patching, and Mending; Heavy-Duty Box Sealing

Maintenance and General Repair; Joint Sealing and Pipe Wrapping; General Purpose Construction Uses; Bundling, Patching, and Mending; Heavy-Duty Box Sealing

May be used in thin metal (less than 0.050" thick).

Metacaulk 1000 can be used in interior applications as a general purpose fire rated sealant and smoke seal for construction joints, through penetrations and blank openings on both vertical and horizontal surfaces. Use Metacaulk 1000 to prevenet the spread of fire and smoke through joints in fire rated gypsum wallboard partitions, concrete block or concrete walls and/ or concrete or corrugated steel deck floor/ ceiling assemblies.

Metal Deck,Vertical

Metal; 18 Gauge and Thinner

Mounting Bases are an effective, versatile, and durable wire management mounting product for routing and securing wires and cables in place. These mounting bases are easy to install and are available in a variety of configurations for adherence to the mounting surface.

Mounting hole cable ties are effective for use in a wide variety of cable and wire bundling applications that require that a wire or cable bundle be attached to another surface such as a control panel, wall, or ceiling. This design allows for use of a screw or rivet for clamping.

Multi-size flashing fits 1-1/4-3" pipe

Nemesis Safety Glasses feature a sporty, flexible, lightweight design that your employees will be happy to wear, Meets ANSI Z87.1+ standards for personal eye protection, Polycarbonate lenses provide 99.9% UVA/ UVB/UVC protection and are hard coated for scratch resistance, atented FLEX-DRY* designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose – all for long-term comfort

Not specified horizontal or vertical application. Not recommended for overhead appplications.

Not suited for applications where holding power is important and should not be installed in overhead areas. For use with self-tapping or wood screws.

One Cable: 14/2, 14/3, 12/2, 12/3, 10/2, 10/3, 8/2, 6/2 Two Cables: 14/2, 14/3, 12/2, 12/3

Padded comfort suspenders offer extreme support and comfort for your tool belt

Perfect for boring through veneers, overlapping holes, or on close centers.

Perfect for industrial identification, color coding, and pipe wrapping purposes.

Perfect for thin-guage metal applications (up to 20 guage).

Perfect for wire bundling with a tension stregnth of 175 lbs, this cable tie is a great option for heavy duty cable and wires.

Perfect solution in a wide variety of applications in industry, wire bundling, and cable management. Among the most popular cable ties options.

Plastic toggles are intended for lightweight duty in hollow walls (wallboard or plaster), ie. Drapery rods, junction boxes, soap dishes, towel bars, etc. . .

Predrills precise hold in gypsum wall board. For 3/8", 1/2", or 5/8" wall board. One tool installation: requires only a Phillips screw driver. Removable

Predrills precise hold in gypsum wall board. For 3/8", 1/2", or 5/8" wall board. One tool installation; requires only a Phillips screw driver. Removable

Predrills precise hole in gypsum wall board, wood, or double drywall. For use in 3/8", 1/2", or 5/8" wall board. One tool installation; requires only a Phillips screw driver. Removable.

Predrills precise hole in gypsum wall board. For 3/8", 1/2", or 5/8" wall board. One tool installation; required only a Phillips screw driver. Removable

Predrills precise hole in gypsum wall board. For 3/8", 1/2", or 5/8" wall board. One tool installation; requires only a Phillips screw driver. Removable

Predrills precise hole in gypsum wall board. For 3/8", 1/2", or 5/8" wall board. One tool installation; requires only a Phillips screw driver. Removable.

Predrills precise hole in gypsum wall board. For 3/8", 1/2", or 5/8" wall board. One tool installation; requires only Phillips screw driver. Removable

Predrills precise hole in gypsum wall board. For use in 3/8", 1/2", and 5/8" wall board. One tool installation. Requires only Philips screw driver. Removable

Predrills precise hole in gypsum wall board. For use in 3/8", 1/2", or 5/8" wall board. One tool installation. Requires only Phillips screw driver. Removable.

Predrills precise hole in gypsum wall board. For use in 3/8", 1/2", or 5/8" wall board. One tool installation; requires only a Phillips screw driver. Removable

Predrills precise hole in gypsum wall board. For use in 3/8", 1/2", or 5/8" wall board. One tool installation; requires only a Phillips screw driver. Removable.

Predrills precise hole in gypsum wall board. For 3/8", 1/2" or 5/8" wall board. One tool installation; reuires only a Phillips screw driver. Removable.

Predrills precise hole in gypsum wall board. For use in 3/8, 1/2, or 5/8 gypsum wallboard. One tool installation. Requires only a Phillips screw driver. Removable.

Prevents drills and fasteners from penetrating framed-in cables and plastic pipes

Printed circuits, Office machines, Relays, Switches and Computer systems

Provides a hardened bearing surface, creating more uniform torque control and load distribution.

Provides a hardened bearing surface, creating more uniform torque ontrol and load distribution.

Provides moisture-tight electrical and mechanical protection

Reliable and easy to use portable knife sharpener that can be done by anyone. It has diamond-honed tungsten carbide blades that will not rust and can sharpen most knives, serrated knifes, cleavers, axes, machetes, and many cutting tools. It has a ergonomic handle and full length finger guard to ensure safety when sharpening.

Removes broken screws and bolts.

Removes dirt, oil, grease, wax and tar from the following: Relays, air tools, wire rope, gears, molds, sprockets, clutches, brakes, dies, locks, generators, chains, radar equipment, air conditioners, electric motors, material handling equipment

Removes dirt, oil, grease,wax and moisture from the following: motors, machinery and equipment, switches, relays, communicators, transmitters, tooling, antenna insulators, molds, controls, printed circuits, gold and silver, fuse holders, oscillators, rada

Removes grease and dirt from: Metal, Finished Wood, Porcelain, Vinyl, Leather, Laminated Surfaces, Glass, and spots on synthetic carpet

Repairs holes, cracks, and splits on asphalt coated, composition, and metal roofs. Seals metal joints and flashings at parapet walls, chimneys, skylights, vent pipes, etc.. Seals tabs of asphalt shingles.

Replacement bit for MegaPro 15-in-1.

Roof-mounted supports may be used to support either horizontal or vertical pipe runs.

Roof-mounted supports may be used to support either horizontal or vertical pipe runs. Economical support for non-specification related applications.

Round Stud Bushing are a durable plastic ring that can be easily installed into a knockout to allow cables and wires pass through the knockout with the risk of damaging the cables on a sharpe or jagged edge

SAMMY X-Press Anchors for Metal Deck and Purlin

SDS arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills

Seal, Bond, Insulate, Deaden Sound

Seals open knock-out holes

Seals Open Knockout Holes

Securing Varied Loads

Sharpen Knives

Sharpneasy is a 2-Step Knife Sharpener designed with two v cut ceramic rods at the top and bottom for coarse or fine knife sharpening.

Ship Auger bits are among the popular options for all drill bits most commonly used for drilling holes in base materials

Single Service Conductors, Through Splice, Direct Burial, Water Tight

Sleeve type hollow wall anchor designed for us in base materials such as plaster, wallboard, or hollow tile. Removeable wall anchor that can used for re-anchoring

Small Hard to Splice Areas, Butt, Branch, or Through Splice, Direct Burial, Water Tight

Sound Barrier Pad can be shaped in a variety of forms to form moisture and vapor tight seal to exclude water and dust from any given area under atmospheric pressure. Pads have an excellent sound deadening characteristics where needed.

Specially designed for holding inverted marking paint cans.

Spiral point taps are ideal for machine tapping through holes or blind holes with adequate bottom clearance.

Standard hanger bolts are intended to be inserted into a pre-drilled pilot hole.

Standard straight-edge replacement blade for utility knives.

Steel Drop-In Anchor is an all steel anchor for us in solid concrete, lightweight concrete, and concrete-filled steel deck members. The anchors can also be considered for hand stone and solid block base materials.

Steel Drop-In Anchor is an all steel anchor for us in solid concrete, lightweight concrete, and concrete-filled steel deck members. THe anchors can also be considered for hand stone and solid block base materials.

Steel, copper, brass, aluminum, Plexiglass, sheet metal, PVC, plasterboard, hole enlarging

Suitable as a phasing tape for electrical conduit, circuit wires, motor leads, splices, and terminations. Provides moisture-tight electrical and mechanical protection. Resists UV rays, acids, alkalis, abrasion, moisture, and corrosion.

T20H & T25H Star Fasteners

Take the annoyance out of assembling/dissembling/repair of furniture with this 15-in-1 Multi-Bit Screwdriver. With 14 hex-specific bits (including both imperial and metric sizes) and a ¼” hex nut driver, you can toss the provided Allen key aside and save your hands from a bit of pain. This driver is also great for electronics, tool maintenance, and bike repair. Complete with the Original Megapro patented technology – you’ll have what you need to get the job done.

Tapcon Concrete Fastening System

Temporary and Permanent Applications

The 13-in-1 ratcheting screwdriver shaft is made from Stainless Steel 303 and includes 6 sizes of star screwdriver bits. This magnetic screwdriver drive fasteners easier and faster with its precision 28-tooth ratchet design and rubberized cushion grip handle

The conical plastic anchor is a light-duty part that can be used in drywall, concrete, and hollow block or brick.

The conical plastic anchor is a light-duty part that can be used in drywall.

The deeper thread design offers greater resistance

The deeper thread design offers greater resistance to pull-out forces.

The square neck is designed to keep the bolt from turning as a nut is thightened.

The square neck is designed to keep the bolt from turning as a nut is tightened.

The ultimate tool pouch is a durable lightweight tool pouch desgined for comfort and efficiency on the jobsite

These are heavy-duy, non-bottom bearing anchors of greater shear strength than other light and medium-duty expansion anchors for use in concrete and stone.

These ground clamps are made to accommodate bare cable.

These light-duty anchors are for use in hollow block or gypsum wallboard.

They are designed for attaching termination bar to solid concrete, solid brick, block or masonry walls.

They are designed to be used in solid or hollow masonry, including cinder block, brick, marble and concrete.

Threaded fastening system for suspending steel threaded rod horizontally in wood fixtures

Threaded fastening system for suspending steel threaded rod vertically in steel fixtures

Threaded fastening system for suspending steel threaded rod vertically in wood fixtures

Threaded fastening system for suspending steel threaded rod vertifically in steel fixtures. Nut included

To be used in drilled and tapped holes which are threaded full length.

To drill into wood

To provide ground bonding in a power distribution box, junction box, or multi-gang receptacle box.

To reduce the size of a female hub to accommodate a smaller size of conduit or male threaded hub.

Transforms any standard spray can of paint, cleaner, or lubricant into a spray gun.

Turns a standard drill into a keyless chuck for 2" and longer power bits.

Ultiamte Electrician's tool belt is a lightweight durable tool belt designed with Electrician's in mind

Uncorded ear plug designed to offer hear protection in some of the noisiest of environments

Use in applications where access to the back of the installed fastener is prohibited. ie. metal roof deck, tubular steel, or vapor barrier fabric. No retaining nut required.

Use to install wall plates or as wall plate replacement screws

Use to mark on a cariety of surfaces—including metal, wood, and plastic.

Use to seal outlet and wall plates to reduce heat loss.

Used for construction and desctruction

Used for rough boring in wood.

Used in utility construction, turn and irrigation, CATV, pipeline and mechanical contractors. Tape is detected from above ground with a handheld non-ferrous detector. Lines may be exposed without the expense of digging. Installation instructions are printed on the tape itself.

Used to apply a uniform 1" to 1-1/2" inch width of paint.

Used to check for underground structures, such as pipes, lines, and other unseen obstacles.

Used to install Hangerbolts

Used to join two externally threaded parts of different thread diameters, often two pieces of threaded rod.

Used to join two externally threaded parts of equal thread diameter and pitch, often two pieces of threaded rod.

Used to mount motors to machinery; also popular in automotive and truck repair

Used to mount motors to machinery; also popular in automotive and truck repair.

Used when a part is frequently assembled and disassembled at a place where torque greater than that achieved with finger pressure is not needed.

Used where an extra wide bearing surface is required.

Used where an extra wide bearing surface is required. Originally designed for auto body repair work, they are also used in sheet metal, plumbing, and electrical work.

Used with wood screws, lags, and tapping screws for light duty applications in brick, block, drywall, masonry, or concrete. Will conform to irregular, out-of-round holes.

Uses: All metal surfaces, nuts and bolts, operating controls, electrical wiring, ignition systems, circuitry, connectors.

Uses: Chains, Gears, Reels, Joints, Hinges, Linkages, Rollers, Nuts and Bolts, etc…

Uses: Drilling, cutting, threading, sawing, reaming and broaching, grinding

Uses: Drilling, cutting, threading, sawing, reaming and broaching, grinding.

Uses: For releasing rusted or frozen lugs and bolts, lubricating tight-fitting parts, repair work, general overhaul, and other metal components

Uses: Rubber mountings, weather-strip insulation, doors, locks, trunk lids, windows, slitter knives and any sliding surface.

Wall Anchor engineered for strengh in a variety of materials. During installation, the screw extrudes and compresses the anchor into the base material. The anchor mold then conforms to the surface of the hole. These plastic anchors have good holding power by distributing the force over a larger surface area. It's plastic body makes it non-conductive making it great for electrical applications. Not recommened for overhead or high holding applications.

Washers are designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached.

Weatherproof First Aid Kit designed to cater to small to medium sized workplaces

Well-suited for permanently anchoring heavy equipment to concrete.

When you work in spaces with recessed or hard-to-reach fasteners, trust that your bit will stay in place is huge and that’s why we created the Megapro ShaftLOK™ Multi-Bit Screwdriver. The patented locking mechanism holds your bit tight, so you are confident that it’ll stay in place. The ShaftLOK™ has 6” extension and 10” extension add-ons that use the same locking tech and can even be connected together for a much longer reach. Loaded with the most widely used bits and the original patented technology, this is a driver that will get the job done.

Will drive easily through drywall, drill a hole in a steel stud up to 14 gage thick, and form its own mating thread. Can also be used for attaching plywood or insulation board to 14 gage metal.

Windows, mirrors, showcases, countertops, painted walls, windshields, chrome, tile, vinyl upholstery. Removes smoke, grease and grime, fingerprints, smudges, dust and road film

Wire protection

With a 40lb tension stregnth, these cable ties are considered to be a cost effective alternative when a heavier standard is not required.

Wood screws have large threads and a smooth shank

Wood screws have large threads and a smooth shank for pulling and mating two pieces of material together.

Wood screws have large threads and a smooth shank.

Wood, plastic, machinable metals, stainless steel alloys, nail-embedded wood

Wood, plastic, machinable metals, stainless steel alloys, nail-embedded wood.

Applications

Metacaulk 1000 can be used in interior applications as a general purpose fire rated sealant and smoke seal for construction joints, through penetrations and blank openings on both vertical and horizontal surfaces. Use Metacaulk 1000 to prevenet the spread of fire and smoke through joints in fire rated gypsum wallboard partitions, concrete block or concrete walls and/ or concrete or corrugated steel deck floor/ ceiling assemblies.

Use Fire Rated Putty Pads for various penetrations: small openings, EMT Pipe, Steel, Conduit, and Cabling, (Telephone, Power, Communications), metal or non-metallic electrical boxes, large steel boxes and junction boxes. UL approved designs Putty Pads with FRM Mortar designs to help provide a barrier or buffer for energized bus ducts or conduits as well as provide a barrier from vibration and movement

APW (Each)

Arbor Size

Average Breaking Strength

150

400

EPDM

Backing Material

Cotton Cloth

Polyethylene Coated Cloth

Polyethylene Coated Cloth / Natural Rubber Adhesive

Pressure Sensitive Adhesive

Pressure-Sensitive Adhesive

Pressure-Sensitive Rubber-Based Adhesive

Base Content

100% Pure Silicone

100% RTV Silicone

Silicone

Water

Base Type

Acrylic Enamel

Solvent-Based

Water-based

Water-Based

Benefits/ Features

Designed with a special mounting hole, these cable ties are recommened when position is critical or the application requires the product be premounted to a surface before final assembly.

Interally threaded anchor for easy bolt removability and service work, ideal for precast hollow core plank and post-tensioned concrete slabs, lip provides flush installation and consistent embedment, Manual setting tool scores flange when set to verify proper expansion depth

Bit Diameter

Bit Sizes

Flat #4 #6, Phillips #0 #1 #2 #3, Square #0 #1 #2 #3, Star #10 #15 #20 #25

Flat #4 #6, Phillips #0 #1 #2 #3, Square #0 #1 #2 #3, Star #10 #15 #20 #25, 1/4" Hex Shank

Hex 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 2.00, 3.00, 4.00, 5.00, 5.50, 6.00

Blade Length

Blade Material

Bi-Metal

Steel

Blade Type

Blade Width

Bolt Size

2" Phillips Drive (included)

2" Square/Phillips Drive (included)

Brand Name

Buckle

Metal Buckle

Plastic Quick Release

Bundle Diameter

Bundle Diameter (in)

Cable Length

3000'

6500'

Cable Size

Cable Type

Capacity

Carrier Type

Metal Belt Clip

Nylon Loops

Steel Bar

Steel Clip

Channel Height

Channel Width

Characteristics/ Features

East to install, cost effective, highly intumescent, adheres to back of electrical box, non-conductive, dielectric breakdown voltage 22V/mil (ASTM D149), STC rating 53

Expands when exposed to fire, no volatile solvents, no asbestos fillers, single component, applied by hand, adheres to all common building surfaces, STC rating 60-Pads

Good sound insulator, easy to install, highly intumescent, STC rating 54, complies to UL required accelerated aging and high humidity testing, VOC compliant-CDPH standard method v1.2, Tested in accordance with UL 263/ ASTM E119 and ASTM E814 (UL 1479)

Water based, excellent freeze-thaw, flexible set, highly intumescent, paintable, VOC compliant, safe and easy to use, 3 year shelf life

Water based, excellent freeze-thaw, flexible set, paintable, VOC compliant, safe and easy to use, STC rating 65

Color

Color Family

APWA

APWA Utility Marking

Fluorescent

Fluorescent Colors

Common Usage

Compliance

Melted and Manufactured in the United States

Miami-Dade County Approved, Meets or exceeds ASTM D3409 (Standard Test Method for adhesion of asphalt-roof cement to damp, wet, or underwater surfaces), Meets or exceeds ASTM D4586 (Standard Specificatoin for Asphalt Roof Cement)

Composition

134A - Tetrafluoroethane

Hexane (110-54-3), Ethylbenzene (100-41-4), Xylene (1330-20-7)

Propane (74-98-6), Butane (106-97-8), 2-Butoxyethanol (111-76-2)

Tetrachloroethylene (127-18-4), Carbon Dioxide (124-38-9)

Trichloroethylene (79-01-6), Carbon Dioxide (124-38-9)

Conductor Material

Brass

Bronze

Copper

Zinc Plated

Conductor Size

Configuration

With 1202CF Clip (NO PIN)

With BP 1.25" Pin and Clip

WITH PIN AND CLIP

Configurations

7 Pocket Pouch, Tape Clip, Hammer Holder, Electrician Tool Pouch, Comfort Belt

Ultimate Connect-A-Pouch, Hammer Holder, Ultimate Electrician Tool Pouch, Comfort belt

Connection

Bare Wire

Solid, Bare Wire Lead

Spade

Construction

Construction Material

24-gauge galvanized base with elastomer collar

Galvanized Steel

Steel

Container

Contents

(1) Triangular Badage 43in x 43in x 61in, (1) Burn Dressing 4in x 4in, (10) Burn Gel Packets, (10) Hand Sanitizer 0.9g, (1) Conforming Gauze Bandage 2in x 4.3yrds, (4) Nitrile Gloves, (1) First Aid Guide, (1) Scissors, (1) Tweezers, (1) Plastic Case, (2) Eye Pads, (2) Gauze Pad 3in x 3in, (1) Adhesive Tape 1/2in x 5.5yrds, (1) Instant Ice Pack, (25) Plastic Strip Bandage 3/4in x 3in, (1) Thermal Blanket, (1) CPR Face Shield, (10) Tripe Antibiotic 0.5g, (10) Cotton Tip Applicators, (2) Eyewash 0.5oz, (3) Alcohol Wipes, (20) Antiseptic Wipes, (2) Wound Pad 5in x 9in

(1) Triangular Bandage 43in x 43in x 61in, (5) Burn Gel Packets, (1) Conforming gauze 2in x 4.3 yds, (4) Nitrile Gloves, (1) First Aid Guide, (1) Tweezers, (1) Plastic Case, (4) Gauze Pads 3in x 3in, (1) Adhesive Tape 1/2in x 5.5 yds, (25) Plastic Strip Bandage 3/4in x 3in, (1) Thermal Blanket 55in x 83in, (6) Triple Antibiotic 0.5g, (10) Cotton Tip Applicators 3in, (10) Antiseptic Wipes, (1) Wound Pad 5in x 9in

Corded

No

Yes

Coverage

12-1/2 sq. ft. per gallon applied 1/8" thick.

Smooth, even coverage and performance

Cuff

Decimal Size

0.136"

0.1495"

0.1590"

0.2010"

Def Nom

Density

Heavier than air

Heavier than Air

Description

Black Frames with Clear Lenses (ideal for indoor use for maximum light transmission), with anti-fog coating, See-through side shields provide side impact protection without blocking peripheral vision, Features an hard coating to prevent lens damage, Meets ANSI Z87.1+ standards for high impact and polycarbonate lenses provide 99.9% UVA / UVB / UVC protection

Class 2 Economy Mesh Zipper Vest. Ideal for workers who require greater visibility under inclement weather conditions, when background are complex, or when tasks divert attention from approaching vehicle traffic.

extra-lightweight frameless design for long-term comfort; No-brow design increases upward peripheral vision and limits interference with hard hat suspension systems, Meets ANSI Z87.1+ standards for personal eye protection; TAA compliant, 8.25 base curve polycarbonate lenses provide 99.9% UVA/ UVB/UVC protection

Fits Medium to Large cordless drill, center balanced designed, angled for quick access, padded for protection, upper bit pocket with velco closure, holster strap

General purpose fire rated sealant, acoustic sealant, and smoke seal for construction joints and through-penetrations. 150+ is a water based, non-sag caulking grade sealant that is easy to apply as well as retrofit.

Hellraiser Safety Glasses feature black frames and smoke polycarbonate lenses provide 99.9% UVA/ UVB/UVC protection to help prevent eye damage, meet ANSI Z87.1+ standards, Comfortable eye protection helps drive compliance, so these feature flex point temples for comfort and stability, ellraiser safety glasses have hard coated lenses for scratch resistance and longer life

Is a moldable non-curing one component fire rated material for through-penetration firestop systems. The Putty will intumesce when heated, forming an insulating char. In the event of a fire, the putty will prevent the spread of flames, smoke, gas and water through penetration openings. Easily applied by hand, no tools or mixing required.

is a single component fire rated gasket for use with electrical boxes when addressing steel electrical box penetrations in fire rated assemblies. It is mounted on the inside of the cover plate and installed at the same time as the cover plate, covering the opening and providing the necessary fire protection. When exposed to heat, the gaskets highly intumescent nature causes it to expand forming a char that will seal off the opening and prevent the spread of flames and limit the temperature rise on the unexposed surface.

Is a single component fire rated insert for use with electrical boxes. It is inserted on the inside back wall of an electrical box, and is a highly intumescent firestop material. When exposed to fire, the box guard expand forming a char that will seal off the opening and prevent the spread of flames and limit the temperature rise on the unexposed surfaces.

Lightweight Polyester Mesh Vest with two vertical 1" yellow reflective glossy tape striping on both front and back. Vest includes front hook and loop closures, elastic side straps and on inside lower left pokcet.

Meets the "High Impact" level of the ANSI Z87.1+ standards, Polycarbonate lenses provide 99.9% UVA/UVB/UVC protection to help prevent eye damage, Sport grip temples help reduce slippage, dual lenses offer wraparound protection and the safety sunglasses feature soft, flexible rubber nose pads for comfort and fit, Anti-scratch coating on every lens to prevent lens damage

Orange polyestar mesh vest with 3/4" lime reflective stripes. It features a hook and loop tab front closure an has elastic strap on each side. The bright colors allow you to stand out against your surroundings. One size fits most

Sound Barrier Pads is a gray or off-white permanently soft, non-drying pad which contains non-drying synthitic polymers and oils to enhance its sealing properties and aging characteristics. The pads will adhere to clean metals, glass, or plastic surfaces. Non-Toxic/ Non-Hazardous

The Nemesis Safety Glasses have a modern sleek and stylish lightweight design that your employees will be happy to wear, Polycarbonate lenses provide 99.9% UVA/UVB/UVC protection; Meets the ANSI Z87.1+ standards, Patented FLEX-DRY* designed to be extremely flexible, to channel sweat away from the eyes, and to help prevent slippage down the nose – all for long-term comfort

Diameter

Diameter in.

Dielectric Strength

10,500 per ASTM D-0877

47,000 Volts

47,400 Volts

Disclaimer

Nor for Life Safety or Overhead Applications

Not for Life Safety or Overhead Applications

Drill Diameter

Drill Point

Drill Size

Drive

#2 Phillips

Phillips

Drive Pin

Removable anchor. Screw can be backed out with Philips head driver

Removalbe anchor. Screw can be backed out with Philips head driver

Drive Size

Drive Type

Driver Size

Dry Time

< 10 minutes

<10 Minutes

15 minutes

Eye Diameter

1/2"

13/16"

23/32"

39/64"

Fastener Size

#10

#8

1/4"

5/16"

Feature

2x Stronger and 60x more flexiable than polyurethane, Non-flammable once cured, Checmical resistant, Waterproof, Washer/ Dryer Safe, Paintable, temperature resistant, flexiable

UV Resistant (no yellowing or cracking when used outdoors), 2x Stronger and 60x more flexable than polyurethane, Non-flammable once cured, Checmical resistant, waterproof, paintable, temperature resistant, flexible

Features

Finish

Fits Bolt Sizes

Fixture Thickness

#8

Max 3/4"

Flammability

Flange Diameter

1/2"

29/64"

Flash Point

Flat Load LL

Flat Load UL

Flute Length

Flute Type

Double Twist

Parabolic Flute

Ship Head Auger

Form

Colorless Volatile Liquid

Foam

Liqud

Liquid

Fractional Size

Fragrance

Frame Color

Frame Design

3/4 Frame

Full frame

Full Frame

Half Frame

Frame Material

Polycarbonate

Steel

TR90

Frames

Functional Cure

24 Hours

3-4 Weeks (at 77 Degrees Fahrenheit)

General Uses

Door and window fram installations, masonry applications, electrical applications, mounting fixtures, cladding and clips, general purpose anchoring

Door and window frame installations, masonry applications, electrical applications, mounting fixtures, cladding and clips, general purpose anchoring

Door and window frame installattions, masonry applications, electrical applications, mounting fixtures, cladding and clips, general purpose anchoring

Screen enclosures, storm shutters, light duty fixtures, light duty industrial mounts

Glove Type

Grade

Grade 2

Grade 5

Grade 8

Grade A

Grip Range

Handle Color

Handle Diameter

1-1/2"

1-7/32"

Handle Length

Handle Material

Handle Type

Head Color

Head Diameter

Head Height

Head Length

6-1/4"

7-1/4"

Head Material

Forged Steel

Steel

Head Style

Hex Washer Head

Phillips Flat Head

Head Type

Head Weight

10

12

5

8

Head Width

Height

Holding Weight

Hole Diameter

Hole Mount Size

#10

#6

ICC Evaluation

ICC EVALUATION SVC

ID (Min)

Included

Nut and Washer

Patented Caulk Buddy™ finishing tool

Setting Tool

Includes

Inside Diameter

Inside Diameter (in)

0.188 in

0.375 in

Installation

Requires a pre-drilled hole for proper install

Requires Steel Rod Hanger Drive, Minerallac Item 59683

Requires Wood Rod Hanger Drive, Minerallac Item 59682

Insulation

Bare

Bare Armored

Insulated

Permanent Encapsulant

Items Per Kit

111 Pieces

72 Pieces

Kit Includes

LBS F 100%

Legend

Length

Length (in)

Length (in.)

Length ft.

Lens

Lens Coating

Anti-scratch, Anti-fog

FogGard® Plus is a permanent lens coating proven to eliminate lens fogging in 99% of workplace applications.

FogGard™

Lens Color

Lining

HeatKeep® Lining

Kevlar®

Triple-layer technology of micro-fleece lining

Lubricant Type

Material

Material Of Construction

Max Fixture Thickness

3/4"

Max. Working Load Limit

29

43

450

Maximum Drill Diameter

Min Clearance Behind Wall

Min Wall Thickness

3/8"

Minimum Break Strength lbs.

Minimum Concrete Compressive Strength

2,000

4,000

Minimum Drill Diameter

Minimum Embedment Depth

Mounting

Mounting Type

Bracket and Screw Included

Snap In

Snap In/Out

Strap and Screw Included

Noise Reduction Rating

33 dB

33dB

Nominal Diameter

17/64"

5/16"

NSF Category Code

H2 #115050

H2 #115051

H2 #115088

NSF Registered.

Number Of Blades

1

2

5

6

Number Of Cables

18-16AWG-14, 14-12AWG-9, 10AWG-6, 8AWG-4, 6AWG-2, 4AWG-2, 3AWG-2, 2AWG-2, 1AWG-2, 1/0AWG-2, 2/0AWG-2, 3/0AWG-2, 4/0AWG-2, 250MCM-2

18-16AWG-20, 14-12AWG-12, 10AWG-8, 8AWG-6, 6AWG-2, 4AWG-2, 3AWG-2, 2AWG-2, 1AWG-2

18-16AWG-20, 14-12AWG-12, 10AWG-8, 8AWG-6, 6AWG-4, 4AWG-2, 3AWG-2, 2AWG-1, 1AWG-1

8AWG-4, 6AWG-3, 4AWG-2, 3AWG-2, 2AWG-2, 1AWG-2, 1/0AWG-2, 2/0AWG-2, 3/0AWG-2, 4/0AWG-2

Number Of Drill Stages

0

11

12

8

Number of Flutes

1

2

3

4

Number of Hole Mounts

1

2

Number of Holes

1

24 per Foot

Number of Nuts

1

2

Not Included

Number of Pieces

Number Of Points

1

3

Multiple Points

Nut Type

OAL

18"

8"

OD (Max)

Odor

OH Ref

Opening Size

Outside Diameter

Overall Height

0.098"

0.115"

0.205"

Overall Length

Package QTY.

100

50

Ph Range

11-11.05

7

9.0-10.0

Phillips Driver Size

#2

#3

Pipe Tap Size

Pitch

10-24

10-24 IN

Point Type

Rag Type

Bleached Knit

Knit t-shirt material

Knit T-Shirt Material

New Bleached Knit

Resists

Abrasion-resistant

Bleach, Steam, Saltwater, Oils, Detergents, and Other Chemicals

Cut-Resistant

Rockwell Hardness

Rod Coupler Size

1/4"

1/4"-20

3/8"-16

Rod Size

1/2"

1/4"

3/8"

Rod/ Anchor Size

3/4"

3/8"

5/8"

Roll Length

1000

1000'

Roll Width

Rope Diameter

Screw Size

Screw Type

Drywall Screw

Pan Head Square Philips Sheet Metal Screw

Screw Type and Size

#6 x 1 Pan Head Square/Philips Sheet Metal Screw

#6 x 1" Flat Head Phillips Fine Thread Drywall Screw

#8 x 1-1/4 Pan Head Phillips Sheet Metal Screw

#8 x 1-1/4" Pan Head Slotted/Phillips Sheet Metal Screw Included

#8 x 1-1/4" Pan Head Square/Phillips Sheet Metal Screw Included

Shank Diameter

Shank Length

Shank Material

Carbon Steel

Steel

Shank Shape

Shank Size

Shank Type

Shape

Shear Strength

Shear/lbs

1,593

1138

3160

4,680

Shelf Life

3 years from date of manufacture

3 years from date of manufature

3 Yrs. from Date of Manufacture

Shell Color

Shovel Type

Size

Special Features

Specific Gravity

Spiral Groove

No

Yes

Standard

Storage Temperature

70°

Do not expose to temperatures above 120°F

Do not store above 120°F

Room Temperature (70 Degrees Fahrenheit)

Style

Sub Brand

Teeth Per Inch

Teeth Type

0 Degree Rake

Straight Tooth

Temperature Range

Temperature Rating

-40 degrees F - 185 degrees F

-40 degrees F -185 degrees F

-40 degrees F- 185 degrees F

Temperature Tolerance Range

-20° F to +180° F

-30°F to +175° F Will not slump at +275°F

Temple Style

Flex Point Temples

Soft Grip Temples

Tensile Strength

Tensile Strength (lb)

120 lbs

50 lbs

Tensile Strength (lbs.)

Tension Strength

Thickness

Thickness (in)

THK Nom

Thread

10

11

13

16

18

20

24

32

9

Coarse

Right

UNC

Thread Diameter

1/2"

1/4"

3/8"

3/8" – 1/2"

5/16"

Thread Direction

Clockwise

Right Hand

Right-Handed

Thread Length

0.375"

0.375" IN

0.500"

0.625"

0.875"

1"

1/2"

11/16"

11/16" – 1"

1-1/2"

1-1/4"

1-1/8"

1-13/16"

1-21/32"

1-3/4"

1-3/8"

1-5/8"

1-7/8"

2.125"

2-1/4"

2-1/8"

2-3/4"

2-3/8"

2-7/8"

3"

3/4"

3-3/4"

3-3/8"

4-3/8"

4-40: 7/8", 6-32: 3/4", 8-32: 1", 10-24: 1", 10-32: 1-1/8" & 1/4"-20: 1-1/8"

7/8"

Thread per Inch

1/4"-20

10

11

13

16

16 – 13

18

20

20 – 16

24

24 TPI

32

4-40, 6-32, 8-32, 10-24, 10-32 & 1/4"-20

Thread Size

#6-32

(#8) 18, (#10) 16

1/2"

1/2-20

1/4"

1/4" x 2"

1/4"-20

1/4-20 x 1" #3

1/4-20 x 1-1/2" #3

1/4-20 x 1-1/2" #3/Nut included

10

11

12

13

14

15

16

16 TPI

18

18, 16

20

24

3/4"

3/8"

3/8-16

32

32 TPI

40

5/16" x 2-1/2"

5/6" x 3"

5/8"

5/8-18

6

6-32

6-32, 8-32, 10-32, 1/4"-20, 5/16-18, 3/8-16

7

8

8–10

8–9

9

Thread Type

2A External

2A External Thread

2A External Threads

Coarse

Coarse Thread

Coarse Threads

Deep Thread

Fine

Fine Threads

Internal

Internal Threads

National Coarse

NC

Patented Advance Threadform

Rolled

Type A

Type-A

Type-AB

Type-BSD

Type-BSD Self Drilling

Type-BSD Self-Drilling

UNC

Tip Size

Tip Type

Torque FT

Trade Size

Twist Length

12"

4"

4.000"

5.500"

Type

Ultimate Load Capacities

1450 lbs

1740 lbs (16 Steel Gauge), 1945 lbs (14 Steel Gauge)

3435 lbs (16 Steel Gauge), 4025 lbs (14 Steel Gauge)

785 lbs (16 Steel Gauge). 1140 lbs (14 Steel Gauge)

Ultimate Tensile Strength

1058 lbs (based on 4000psi concrete)

1367 lbs (based on 4000psi concrete)

2183 lbs (based on 4000psi concrete)

2690 lbs (based on 4000psi concrete)

595 lbs (based on 4000psi concrete)

Ultimate Tension/lbs

1,018

2,000

2,900

538

Uses

Anchoring to concrete block, suspending conduit, fire sprinklers, cable trays and strut, suspended lighting, pipe supports.

Suspending conduit, concrete formwork, fire sprinkler supports, pipe supports, cable trays and strut, suspended lighting

Very Versatile, It increases energy efficiency by stopping drafts and it fills holes around pipes and ducts, reduces noise, controls radon, stops foundation leaks, seals out insects, confines asbestos fibers, strengthens tub bases, seals stress-skin panels, upgrades weatherization, seals HVAC intrusions, repairs boat flotation, seals refrigeration panels, waterproofs, and seals electrical conduits.

UV Protection

99.9% Protection from harmful UV rays.

99.9% protection from harmful UVA and UVB rays.

Lenses provide 99.9% protection from harmful UVA/UVB rays.

Lenses provide 99.9% protection from harmful UVA/UVB Rays.

Voc

48.50%

VOC Compliant

Yes

Wall Thickness

1/2" to 5/8"

5/8-13/16

Washer Outside Diameter

0.315"

0.670"

Weight

1.5 lbs

1.6 lbs

Width

Width (in)

Wing Span

1.270"

1.375"

Wire Diameter

0

2

4

Working Load Limit

Working Temperature

Cully

ITW Sammys® Anchor

ITW Sammys® Anchor

ITW Sammys® Anchor

ITW Sammys® Anchor

ITW Sammys® Anchor

ITW Sammys® Anchor